Current position > Product detail
『Yuchai flowmeter』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)
1. Is the Yuchai electronic fuel injection engine lacking high-speed power? Yuchai Yc4D -30 engine, suitable for both low and medium speeds, 100 1. Cause analysis: The main reasons are incorrect ignition advance angle, low fuel pressure, air leakage in the intake system, malfunction of the throttle position sensor or front air flow meter, poor operation of the fuel injector, and poor operation of the EGR system.
2. Troubleshooting process:
1. After starting the engine, check if the "check engine" warning light is off
2.1 If the warning light is not off, check the cause and location of the fault according to the fault code
2.2 If the warning light is off, check the oil pressure of the supply system, the operation of the fuel injector, and the quality of the gasoline.
.3、 Check if the ignition timing is delayed too much
4.1 The ignition timing is normal. 4.2 If the ignition timing delay is too large, check whether the knock sensor and ECU are normal. 5. Check whether the EGR system is normal.
6、 Check if the intake and exhaust systems are blocked.
7、 Check if the signals of the air flow meter, throttle position sensor, crankshaft position sensor, camshaft position sensor, and oxygen sensor are normal. 8.1 Abnormal, check for sensor malfunction. 8.2 Normal, check the ignition high voltage and ignition energy during acceleration. 9.1 If the ignition high voltage and ignition energy are abnormal, troubleshoot according to the ignition system. 9.2 The ignition high pressure and ignition energy are normal. Check the ignition timing, cylinder pressure, and mechanical faults of the disassembly machine.
2. How to solve the problem of black smoke and insufficient 
There are usually multiple reasons for the problem of black smoke and insufficient power in Yuchai engine model YC4FA115-40. Firstly, incorrect ignition advance angle, low fuel pressure, air leakage in the intake system, malfunction of the throttle position sensor or air flow meter, poor operation of fuel injectors, and poor operation of the EGR system can all lead to this problem. For such problems, we need to follow certain steps for troubleshooting. Firstly, after starting the engine, observe whether the "Check Engine" warning light is off. If the warning light does not turn off, the specific cause and location should be checked according to the fault code. If the alarm light has been turned off, the next step is to check the oil pressure of the supply system, the working condition of the fuel injectors, and the quality of the gasoline. Next, check if the ignition timing is delayed too much. If the ignition timing is normal, check if the knock sensor and ECU are functioning properly. If the ignition timing delay is too large, further inspection is needed. Then, check if the EGR system is working properly to ensure that it is functioning properly. In addition, it is necessary to check whether the intake and exhaust systems are blocked. Further check whether the signals of the air flow meter, throttle position sensor, crankshaft position sensor, camshaft position sensor, and oxygen sensor are normal. If the signal is abnormal, it is necessary to check whether the sensor has a fault. If the signal is normal, it is necessary to check the ignition high voltage and ignition energy during acceleration. If the high voltage and ignition energy at the ignition side are abnormal,